- Mayoristas de rodamientos
- Rodamientos de rodillos cónicos Rodamientos de bolas de empuje Rodamientos de bolas de precisión
Español
English
العربية
Deutsch
Ελληνικά
Français
Bahasa Indonesia
Italiano
日本語
Português
Русский язык
Shqip
Svenska
ไทย
Türkçe
Українська
- Dirección258 Bearing Wholesalers Center Hill, Singapur 628925
- Dirección Fábrica258 Bearing Wholesalers Center Hill, Singapur 628925
- Holario de Trabajo9: 00-18: 00 (بتوقيت بكين)
- Teléfono de la empresa(Holario de trabajo)+6531591338
- Teléfono de la empresa(Teléfono de la empresa)+6531591338
- Fax+6531591338
Thrust spherical roller bearings
Contacta ahoraA thrust bearing is a particular type of rotary bearing. Like other bearings they permit rotation between parts, but they are designed to support a predominately axial load.
Thrust bearings come in several varieties.
Thrust ball bearings, composed of bearing balls supported in a ring, can be used in low thrust applications where there is little axial load.
Cylindrical thrust roller bearings consist of small cylindrical rollers arranged flat with their axes pointing to the axis of the bearing. They give very good carrying capacity and are cheap, but tend to wear due to the differences in radial speed and friction which is higher than with ball bearings.
Tapered roller thrust bearings consist of small tapered rollers arranged so that their axes all converge at a point on the axis of the bearing. The length of the roller and the diameter of the wide and the narrow ends and the angle of rollers need to be carefully calculated to provide the correct taper so that each end of the roller rolls smoothly on the bearing face without skidding. These are the type most commonly used in automotive applications (to support the wheels of a motor car for example), where they are used in pairs to accommodate axial thrust in either direction, as well as radial loads. They can support greater thrust loads than the ball type due to the larger contact area, but are more expensive to manufacture.
A spherical roller thrust bearing
Spherical roller thrust bearings use asymmetrical rollers of spherical shape, rolling inside a house washer with a raceway with spherical inner shape. They can accommodate combined radial and axial loads and also accommodate misalignment of the shafts. They are often used together with radial spherical roller bearings. Spherical roller thrust bearings offer the highest load rating density of all thrust bearings.[1]
Fluid bearings, where the axial thrust is supported on a thin layer of pressurized liquid—these give low drag.
Magnetic bearings, where the axial thrust is supported on a magnetic field. This is used where very high speeds or very low drag is needed, for example the Zippe-type centrifuge.
| Bearing Number | Bore Dia | Outer DIa | Width | Size |
|---|